Results 1 to 6 of 6

Thread: Engraving

  1. #1

    Engraving

    I was browsing through ebay and was looking at older horns like Boosey & Co Solbron Euphonium and noticed the intricate bell engravings. The engravings add such beauty to the horn. Sorry for my lack of knowledge on this, but were these standard engravings? or did you have to pay a premium for them?

    These designs are aesthetically pleasing but are they just for looks/trademark design from the company? It seems like they don't make euphoniums as they used to.


  2. Engraving

    These designs varied. Some manufacturers, like Conn, had their own custom engraving department and for a price would do extra work. Often, the designs were standardized (such as the Conn "Lady") and represented some kind of logo for the company. For the most part, by the 1960's or so, the elaborate engraving was a thing of the past, though one can still see some pretty elaborate stuff on some high end makes of smaller instruments such as the Shires trombones or custom trumpets.

    For a while, Besson/Boosey & Hawkes used a stamped logo (the Round Stamp of the mid-70's to mid-80's) instead of an engravied logo. These days, the engraving on bells is mostly done using laser etching. Much cleaner and more uniform, but generally a much smaller engraving.

    Doug
    Sterling Virtuoso 1065HGS & Adams E3 Prototype 0.70 Top Sprung valves
    Sterling Virtuoso 1050HGS baritone
    New England Brass Band
    Winchendon Winds/Townsend Military Band

  3. #3

    Engraving

    If I remember correctly, some companies today will do custom engraving on any horn if the horn is in for overhall or refinishing. So you CAN have that classic look on a modern horn for an extra fee.

    Dave Werden (ASCAP)
    Euphonium Soloist, U.S. Coast Guard Band, retired
    Adams Artist (Adams E3)
    Alliance Mouthpiece (DC4)
    YouTube: dwerden
    Facebook: davewerden
    Twitter: davewerden
    Instagram: davewerdeneuphonium

  4. #4

    Engraving

    Try this company. I know some flute friends that use them for custom work.

    -John

  5. #5

    Engraving

    Sherry Huntley and Jay Dumars do custom hand-engraving of brass instruments.

    Master engraver Ken Hurst, who is a legend in the gun and knife world, has recently taken an interest in engraving musical instruments. (In addition to individual commissions, Ken's clients include Winchester, Colt, Ruger, Walther, and Harrington & Richardson.) Here are a couple of images of his work:



    .

  6. #6

    Engraving

    Thank you everyone for your wealth of knowledge on this topic!


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •