Results 1 to 4 of 4

Thread: FS: Compensating B&H E-flat tuba with interchangeable bells and leadpipes

  1. FS: Compensating B&H E-flat tuba with interchangeable bells and leadpipes

    Update: This tuba is now SOLD. Thanks!
    ______________________________________

    For sale is a Boosey and Hawkes four valve compensating E-flat tuba with three interchangeable bells and two interchangeable leadpipes. This instrument plays extremely well, can produce a broad variety of different tuba sounds, and is just about as close as one can get to "one tuba that can do everything."

    You can read about the development of this tuba HERE. Pictures can be found HERE.

    This instrument started as a 1955 15" bell B&H compensating E-flat tuba (in high pitch, for more tuning flexibility). I cut the original bell and fitted it with parts from a King 1240: a female receiver on the stem, and a male tenon on the flare. This allows the original bell to still be used, but also permits the user to attach King bells as well. It comes with both a 22" upright bell and a 22" recording bell. The King bells have a larger throat than the B&H bell (larger too than 19" B&H/Besson bells, which are basically the same as the 15" bell but with more "pancake"), and they are also a few inches taller (which has the effect of making the bottom bow "bigger" acoustically). The King bells give the horn even more of a "contrabass" character than a standard 19" bell compensating tuba would have. Combine this with the fact that the instrument has also been converted to interchangeable leadpipes (having the original narrow Imperial leadpipe with an American receiver and a modified extra-wide 981 leadpipe with a custom extra-large receiver), it is now basically two (or three) tubas in one:

    -15" bell, narrow leadpipe, shallow mouthpiece="bass tuba" feel and sound
    -22" bell, wide leadpipe, deep mouthpiece="contrabass tuba" feel and sound (in upright OR recording configuration)

    The custom extra-large receiver could be easily and inexpensively swapped for a standard American-shank Besson receiver, but it really does play better with the larger shank. I have a custom Doug Elliott setup that works fantastically well with the large leadpipe and bell that I can include, if the buyer wishes. Doug can make a rim in any size and style to suit one's taste, or Houser/Sellmansberger rims also screw on to Doug's cups.

    Other more minor modifications include an extended compensating third valve slide for better low register intonation, a grime gutter under the valves, and extra water keys placed in strategic locations. The valves have also been precision aligned with rubber o-rings.

    Overall, the instrument looks like a well-used frankenhorn...but it's in solid mechanical condition. The valves seal well, there are no leaks elsewhere on the instrument, and there are no major dents. The 15" bell is actually from a 1925 model tuba and has beautiful engraving; there's a small 2-3" crack at the bell rim (pictured) that has been solidified with solder but doesn't affect playing. The King bells are in good shape.

    It has remarkably good, "point and shoot" intonation--the upper register is NOT flat, as is the case with so many other compensating E-flat tubas. The low register also is not "stuffy," but responds nicely with a full sound. This is the perfect instrument for a euphonium or trombone player who wants to double on tuba, as it's so versatile and easy to play. You can get a contrabass tuba sound with bass tuba response and accuracy.

    It comes with a like-new Protec gig bag that fits the horn in any of the three bell configurations, two King bell hard cases, and a heavy-duty tuba stand.

    Asking $4200. Instrument is located in Edinburg, VA. Again, pics can be found HERE. Please email with questions: funkhoss@gmail.com

    Thanks for looking!
    Attached Thumbnails Attached Thumbnails IMG_1792 2.JPG  
    Last edited by Funkhoss; 02-10-2023 at 08:00 AM.

  2. Bump.


    Feel free to make an offer!

  3. This tuba is still available. Make me an offer!


    I'd also consider trades (or partial trades, depending on value) for a bass trombone or Martin 6/4 B-flat tuba.

  4. #4
    Join Date
    Mar 2006
    Location
    Hidden Valley, AZ
    Posts
    1,034
    That is one really neat tuba.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •