Results 1 to 4 of 4

Thread: FS: Hirsbrunner Crown 4-Valve Compensating Euphonium

  1. #1

    Thumbs up FS: Hirsbrunner Crown 4-Valve Compensating Euphonium

    I had not seen the Crown model name before, but this is clearly a Hirsbrunner and appears to be in the design of the other HB's I have played. The horn has quite a few dents and dings but seller says it is in excellent playing condition. Leadpipe has been replaced; no case is included. It has clearly had plenty of use, but the price is right! Buy-it-now is $2,999 and there IS a MAKE-OFFER button.

    https://www.ebay.com/itm/333589493379?ul_noapp=true

    Interestingly, the seller has listed it for a bid auction, starting at $2499. Both are active now. Here is the new one:

    https://www.ebay.com/itm/Hirsbrunner...R/333593391954

    Click image for larger version. 

Name:	s-l1600.jpg 
Views:	39 
Size:	162.8 KB 
ID:	7612 Click image for larger version. 

Name:	s-l1600.jpg 
Views:	32 
Size:	163.3 KB 
ID:	7613 Click image for larger version. 

Name:	s-l1600.jpg 
Views:	30 
Size:	215.5 KB 
ID:	7614
    Last edited by davewerden; 05-07-2020 at 06:38 PM.
    Dave Werden (ASCAP)
    Euphonium Soloist, U.S. Coast Guard Band, retired
    Adams Artist (Adams E3)
    YouTube: dwerden
    Facebook: davewerden
    Twitter: davewerden
    Instagram: davewerdeneuphonium

  2. #2
    I just won this on EBay. Is there a shop that you would recommend to do some dent pulling and possibly to change the lead pipe (silver)? Would you refurbish this all the way? What do you recommend based on the condition?

  3. #3
    Congratulations on winning the horn!

    The leadpipe probably just needs to be re-plated. A good repair shop could remove it; then it might need to be sent out for plating.

    As far as dent work, you'd want a good shop because the horn is fairly heavy metal. They might advise you on how far to go. Dents in single-layer metal are probably not too hard to manage. But dents involving the extra protector layer are more work - you have to remove the protector first, take out dents, and re-assemble. That would be more likely to require plating afterward, I think. Maybe someone else has direct experience and can comment.

    I would certainly play the horn a while before doing any work. You might uncover something else that needs fixing/tweaking.
    Dave Werden (ASCAP)
    Euphonium Soloist, U.S. Coast Guard Band, retired
    Adams Artist (Adams E3)
    YouTube: dwerden
    Facebook: davewerden
    Twitter: davewerden
    Instagram: davewerdeneuphonium

  4. That's definitely seen some action, for sure. Not sure if it really needs a full restoration. Maybe just removing the leadpipe to plate, and also pulling off the bottom bow to get all those dents out. It looks like the keel is a bit dented in as well, so they'd have to pull the guard.

    I wonder if the original leadpipe was destroyed, or if they just didn't like it? The path it takes seems to be quite different from the original leadpipe.
    Sterling / Perantucci 1065HGS Euphonium, Yamaha YBB-631S BBb Tuba, and a bunch of trombones.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •