Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Replacement valve felts for Wessex Dolce?

  1. #11
    Join Date
    Dec 2011
    Central North Carolina
    The description of this sounds like worn or loose valve guides to me. There shouldn't be any significant amount of left/right (or radial, is probably a better term) play of the valve guide in its channel. One way to test this is to just take the valve guide out and work the valve without it there. If the noise you're hearing goes away, then the problem is with the valve guide (or the channel).

    You can do similar sorts of tests by borrowing a felt from one valve and using it to double up on another. if the noise goes away with the doubled felt, that suggests maybe you're using the wrong thickness of felt.

    But remember: Just getting the noise to go away isn't your complete goal. That result is only good if it's done in the context of the valve alignment being correct.

    Diagnosis by internet can be difficult.
    Gary Merrill
    Wessex EEb Bass tuba (Denis Wick 3XL)
    Mack Brass Compensating Euph (DE N106, Euph J, J9 euph)
    Amati Oval Euph (DE N106, Euph J, J6 euph)
    1924 Buescher 3-valve Eb tuba, modified Kelly 25
    Schiller American Heritage 7B clone bass trombone (DE LB K/K9/112 Lexan, Brass Ark MV50R)
    1947 Olds "Standard" trombone (Olds #3)

  2. As this problem is the 4th valve specifically, I would guess (difficult to diagnose remote) that the problem is the valve stem is slightly bent and the actual metal button is hitting the valve cap. Check to see if dead center and if not gentle push to bend the stem straight. The felt looks fine, while worn guides do not usually cause clanking.

    If all else fails send video to for advice from Chuck Nickles, Wessex designer and technical expert.
    Customer Services & Chicago Showroom visits:
    Shipping & UK Showroom visits:
    Technical Advice and Parts:

    Visit our Facebook page


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts