What Leather Grip Should I get for my Schiller Euphonium?

[Joshua W.]

Recently, I had to take my Schiller Elite IV (4) Compensating Euphonium to a brass technician to get it professionally shined up. He said that I would need to use leather grips in order to prevent this tarnishing and corrosion of the brass plating by buying leather replacement grips for it to go on my Compensating Section, Valve Grip, and 3rd Valve Tuning Slide. However, upon looking around on http://www.lscoguard.com/index.php?m...rt=20a&page=10, and I was unable to find any replacement for my Schiller model. I also emailed the company and asked them to see if there were any replacements for that, and they haven't responded after a week. I have checked my Email and everything from Junk to Spam and they haven't responded.

I just wonder if anyone here knows exactly what replacements I could get for my model of Euphonium.

Model: Schiller Elite IV (4) Compensating Euphonium
Leather Grips Needed: Valve Grip, Right Hand Compensating Section Grip, and 3rd Valve Section Guard.

[RickF]

Hi Joshua. Welcome to the forum.

I have LSCO guards on both of my horns. They work great because there are three layers... leather outside, plastic inside layer to prevent moisture penetration and a soft layer that comes in contact with the horn like Velour. If the Schiller is an EXACT copy of the Yahama 642 LSCO guards for the 642 should fit the Schiller. But by exactly I mean all the braces have to be exactly the same place.

Larry Black is the owner operator of LSCO and is an excellent trumpet player, so is busy with playing and giving lessons. He is retired from the Atlanta Symphony. I would try sending another email or maybe calling them. I believe his son and wife also work in the shop, but not everyday.

[tonewheeler]

I'll second what Rick has to say and add that they also have a real easy return policy and will customize whatever you need for your specific horn.

[SteveP]

I emailed them about a week ago too, regarding a grip for a tuba. Haven't heard back yet either. I get a little upset when someone in business doesn't return a call or email. I don't care how busy you are you've got to respond to potential customers in a timely manner.

[davewerden]

I emailed them about a week ago too, regarding a grip for a tuba. Haven't heard back yet either. I get a little upset when someone in business doesn't return a call or email. I don't care how busy you are you've got to respond to potential customers in a timely manner.

While I agree with your sentiment, it is not realistic (or even fair, probably) in this market. If you are talking about a large company, then it does seem reasonable to expect a timely response. But many of the companies we deal with are one- or two-person shops.

My own publisher, Cimarron Music, is a one-man shop. But they carry two or three thousand pieces, which include many of our favorites, contest list music, and even recently the old Tuba-Euphonium Press material. But one guy can only do so much, and he often mans the booth at trade shows. Then you have family time and vacations, I'm sure we all hope and understand, included in the competition for his time.

He, at least, is a business man at heart, so he really works and wearing all the hats smartly. Some of these small companies are run by people who had a good idea and inspiration for a product line, but are not born business people. But I try to be grateful for their contributions to our marketplace. I personally use daily two items from one-person shops - the QHR lap pad (and cleaning tool, when I get ambitious) and the QHR had strap. The latter is dependent on TWO one-person shops: the QHR shop and the woman who actually produces the straps.

Be patient and persistent. Sometimes emails get lost in the shuffle, so try again. (I just got a call from my sister this afternoon because I forgot to answer her email from a week ago! Good intentions on my part... but bad execution.)

[SteveP]

Your point is well taken Dave.

However, the internet has changed the way we do business. When I visit a website I have no way of knowing if that business is a one man shop or a larger, storefront operation that has a website too. In fact, most websites are designed to make a business look large and successful. That is the intent. This business's website is no exception. It gives no indication of the actual "size" of the business or of the number of staff available to serve the customer. It's just a listing of merchandise available for purchase.

Knowing what I NOW know I'm ready to give them a lot more slack. I had no way of knowing the actual structure or size of the business. Please don't think harshly of me for my expectations. You know these people and what they do etc. I, until now, didn't.

Steve

[dsurkin]

I just wonder if anyone here knows exactly what replacements I could get for my model of Euphonium.

Model: Schiller Elite IV (4) Compensating Euphonium
Leather Grips Needed: Valve Grip, Right Hand Compensating Section Grip, and 3rd Valve Section Guard.

I had sent them photos of my horn (Mack Brass, the same JinBao horn), and they originally recommended grips for a Besson (if I remember correctly). They sent me a set on trial, but it didn't fit. I wound up buying the set for the Yamaha 642, and it fits okay (the leather grip for the third valve slide is difficult to attach, but it is cut to the right pattern).

I wound up getting the wrist grip from Quick Horn Rinse. http://stores.quickhornrinse.com/ehs...um-hand-strap/. I now use that in place of the leather guard near the fourth valve.

[ChristianeSparkle]

Hi Joshua. Welcome to the forum.

I have LSCO guards on both of my horns. They work great because there are three layers... leather outside, plastic inside layer to prevent moisture penetration and a soft layer that comes in contact with the horn like Velour. If the Schiller is an EXACT copy of the Yahama 642 LSCO guards for the 642 should fit the Schiller. But by exactly I mean all the braces have to be exactly the same place.

Larry Black is the owner operator of LSCO and is an excellent trumpet player, so is busy with playing and giving lessons. He is retired from the Atlanta Symphony. I would try sending another email or maybe calling them. I believe his son and wife also work in the shop, but not everyday.

Just wanted to thank Rick for the explanation on the layers in a hand guard!

I've tried to DIY my own hand strap, as the shipping from US to my country is more than the price of a hand strap itself. Figured I should try making one myself based on the layers Rick mentioned here. Fingers crossed that the fabric won't scratch the horn or tarnish it. Will be taking the straps out at least once a week just to clean the surfaces covered by the guard and strap.



I have to admit, I already have trouble holding a horn as light as a Yamaha EP100 without both my hands and fingers getting strained, I can't imagine how a heavier compensating horn like the Wessex would do to me.

[RickF]

Looks good. Hope it works well.

[Clayton M.]

I am also working on a DIY solution for my XO 1270. It will be a slow going project.